Hydroxyapatite Coating of Ti6A14V Alloys in Alanin-Alanin Sodium Salt Environment with Biomimic Method

Authors : Ibrahim Aydın, Muhammed Çağlayan, Ahmet Pasinli

Pages : 0-0

Doi:10.18466/cbujos.81643

View : 15 | Download : 6

Publication Date : 2016-08-29

Article Type : Other

Abstract :Hydroxyapatite Coating of Ti6A14V Alloys in Alanin-Alanin Sodium Salt Environment with Biomimic Method Biomimetic is an expression used to define the substances, tools, mechanism, a systems created by humans through imitating the systems existing in the nature. With this method the surfaces of base materials activated by various chemicals are coated inside synthetic body fluid (SBF) that is created in the laboratory ground by using the method of defecation. As coating is conducted in an environment which has synthetic body fluid, biomaterials that are completely harmonious with the body can be obtained.   In this study it is aimed to create hydroxyapatite (HA) coating that is completely harmonious with human blood plasma, in Alanin and Alanine Sodium Salt environment by using biomimetic technics for the first time in literature and to analyse it. In the process of HA coating, Ti6A14V alloyed implant materials have been used as base material. In the study, implant materials having Ti6Al4V alloy have been first sandpapered and then they were washed first with pure water and then with acetone. The materials that were also cleaned inside the ultrasonic bathroom, have been waited for 1 day in the 100 mL 5M NaOH + 0,5 mL H 2 O 2 solution in drying-oven for being activated. Later on NaOH was transferred and the materials were washed with pure water. Afterwards it is left to dry at 60 ºC for 24 hours. After being dried, it was waited for 1 hour at 600 ºC and than cooled. With the completion of this process, the synthetic body fluid solution (2L) was obtained with the temperature at 37 ºC and pH value at ~7,4.  Coating process was realised inside SBF with waiting periods of 24, 48, 72, and 96 hours. Relating to the coatings obtained by biomimetic method, surface smoothness and thickness specifications have been determined, their micro structure has been analysed by using Scanning Electron Microscope (SEM), the elementary analyses namely Energy Dispersive X-ray Spectroscopy (EDS) for the surfaces of coating have been determined and X-Ray Diffraction (XRD) analysis have been conducted for obtaining information regarding phases and the concentrations of the phases. The results obtained from the study have been evaluated and discussed.
Keywords :