Investigation of Adsorption of Cu (II) Heavy Metal with Bentonite

Authors : Halil Şenol, Ünsal Açikel

Pages : 231-242

Doi:10.17798/bitlisfen.420210

View : 33 | Download : 13

Publication Date : 2018-12-28

Article Type : Research

Abstract :In this study, adsorption of undesirable copper (II) ion with bentonite in industrial wastewater was investigated at different temperature, pH and time intervals. Adsorption experiments were started with an adsorbent amount of 0.5 grams. Optimum pH determination experiments were carried out in the first stage of the adsorption experiments. The optimum pH determined after the experiments was determined as 5.0. Adsorption rates and adsorbed metal ions concentration increased with increasing concentrations of starting copper (II) ions up to 25 mg / L and 500 mg / L in a medium containing 0.5 g of adsorbent. In the isotherm studies, isotherms were plotted and isotherm constants were calculated and it was clearly observed that the adsorption system, Langmuir and Freundlich isotherms. When the Gibbs free energy (ΔG) values ​​calculated at different temperatures are taken into consideration, it is observed that the copper (II) ions have negative values, especially at low concentrations, and thus the reactions take place spontaneously. The compatibility of the adsorption system with the Langmuir and Freundlich isotherms was investigated, and it was observed that the adenomatoid system adhered to Langmuir and Freundlich. Based on these results, it is concluded that the amount of metal retained on the surface increases with temperature increase. Values (n> 1) were obtained for the experiments performed at each concentration of copper (II) ions (up to 500 mg / L at 25 mg / L).
Keywords : Copper (II) ion, Bentonite, Adsorption.