Tuning the mechanical properties and degradation properties of polydioxanone isothermal annealing

Authors : Xiliang Liu, Shaomin Feng, Xin Wang, Jin Qi, Dong Lei, Yadong Li, Wei Bai

Pages : 1430-1444

View : 11 | Download : 7

Publication Date : 9999-12-31

Article Type : Makaleler

Abstract :Polydioxanone (PPDO) is synthesized by ring-opening polymerization of p-dioxanone, using stannous octoate as the catalyst. The polarized optical micrograph (POM) shows thes pherulite growth rate of PPDO decreases with an increase in the isothermal crystallization temperature. PPDO is compression-molded into bars, and PPDO bars are subjected to isothermal annealing at a range of temperatures (Ta - 50, 60, 70, 80, 90, and 100 degrees C), and correspond to three different annealing times (ta - 1h, 2h, 3h). The effect on PPDO is investigated by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). With an increase in Ta and ta, the grain size and the degree of crystallinity also increase. Meanwhile, the tensile strength is significantly improved. The PPDO bars (90 degrees C, 2 h) reach the maximum crystallinity (57.21%) and the maximum tensile strength (41.1 MPa). Interestingly, the heat treatment process does not result in serious thermal degradation. It is observed that the hydrolytic degradation of the annealed PPDO is delayed to some extent. Thus, annealed PPDO might have potential applications, particularly in the fields of orthopedic fixation and tissue engineering.
Keywords : Polydioxanone (PPDO), isothermal annealing, mechanical properties, hydrolytic degradation in vitro