Determination of Trace Copper by FAAS after Solid Phase Extraction and Preconcentration onto Amberlite XAD-2 Loaded with Nitroso-R Salt

Authors : Mohammad Ali Taher, Sayed Ziae Mohammadi

Pages : 17-26

View : 15 | Download : 9

Publication Date : 9999-12-31

Article Type : Makaleler

Abstract :A procedure for the separation and preconcentration of trace amounts of copper is proposed. It is based on the adsorption of copper(II) ions solution onto a column of Amberlite XAD-2 resin loaded with disodium 1-nitroso-2-naphthol-3, 6-disulfonate (nitroso-R salt). Copper is quantitatively retained on the column in the pH range 5.5-7.8 at a flow rate of 2 mL min-1. The copper complex eluted with 5 mL of dimethylformamide (DMF) and copper was measured by flame atomic absorption spectrometry (FAAS) at 324.8 nm. In this case, 0.10 m g of copper can be concentrated in the column from 800 mL of aqueous sample, where its concentration is as low as 0.125 ng mL-1. Eight replicate determinations of 1.0 m g mL-1 of copper in the final DMF solution gave a relative standard deviation of 1.8%. The sensitivity for 1% absorption was 27.5 ng mL-1. The interference of a large number of anions and cations was studied and the optimized conditions developed were utilized for the trace determination of copper in various environmental and standard samples.
Keywords : Amberlite XAD-2, flame atomic absorption spectrometry, solid phase extraction of copper, standard alloys and biological samples