Evaluation of Mechanical Properties of PLA Auxetic Structures Produced by Additive Manufacturing

Authors : Ahu Çelebi, Mustafa Mertcan Imanç

Pages : 384-396

Doi:10.55546/jmm.1309858

View : 62 | Download : 50

Publication Date : 2023-12-26

Article Type : Research

Abstract :FDM (fused deposition modeling) is one of the most commonly used technologies in additive manufacturing. This technology is used to additively manufacture components from various polymer materials, mostly PLA (polylactic acid), etc. PLA filament is a widely used polymer for 3D printing due to its biodegradability, biocompatibility, and processability. In the study, PLA raw material and cellular auxetic structures were used in the design. Auxetic designs are called metamaterials, they are structures with advanced properties and can be obtained with various geometries. The auxetic designs used in the study are missing rib, re-entrant honeycomb and chiral. One of the biggest advantages of auxetic cellular materials is that it is not bulk material. Having a skeletal structure provides high strength at low density. Today, based on this mechanism, designs that can be used in engineering applications are being studied. It has an important place especially in the medical field, as well as in the areas where high precision and specific products are designed and produced. Considering its relationship with 3D printing technology, 3D printing enables the fabrication of auxetic structures for complex and personal designs. The novelty of auxetic structures comes from their topological features, which display counterintuitive response to the applied load. For the purpose of compare the properties of mechanical tensile, compression, surface roughness tests were applied. It is concluded that the presence of chiral structures improves mechanical performance. The chiral auxetic sample exhibited a maximum stress of 6.68 MPa, the missing-rib auxetic sample displayed a maximum stress of 2.26 MPa, and the re-entrant auxetic sample demonstrated a maximum stress of 3.68 MPa. These results obtained from the tests align well with the range reported in the literature, which falls between 1-12 MPa. The surface roughness of the all-auxtetic structure, perpendicular to the printing direction was higher than the measurements taken parallel to the printing direction.
Keywords : Eklemeli İmalat, PLA, FDM, Öksetik malzemeler