- Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi
- Vol: 16 Issue: 1
- Programming the Measurement System by using VEE Pro to Determine Cyclic I-V Characteristics: Resisti...
Programming the Measurement System by using VEE Pro to Determine Cyclic I-V Characteristics: Resistive Switching Device Application
Authors : Ersin Temel, Abdullah Akkaya
Pages : 110-119
Doi:10.18185/erzifbed.1168992
View : 6 | Download : 3
Publication Date : 2023-03-31
Article Type : Research
Abstract :In this study we introduce a simple program for cyclic current–voltage (I–V) measurements for bipolar and unipolar resistive switching devices. This program (Cyclic I-V, CYC-IV) was developed under the Keysight VEE Pro (Visual Engineering Environment Program) software and has a graphical interface. CYC-IV was developed for programming the Keysight B2912 Precision Source/Measure Unit (SMU) for I-V measurement of resistive switching devices in sweep mode. CYC-IV can be used in six different sweep mode. Moreover, the ramp rate, upper and lower limits of bias, cycle delay time and number of cycles easily define by user. Measurement results were visualized in three graphs that can be viewed simultaneously with the measurements.Keywords : cyclic I-V, sweep mode, VEE Pro, resistive switching devices, SMU