- Environmental Research and Technology
- Cilt: 7 Sayı: 1
- Effect of purification methods on the quality and morphology of plastic waste-derived carbon nanotub...
Effect of purification methods on the quality and morphology of plastic waste-derived carbon nanotubes
Authors : Helen Modekwe, Ishmael Ramatsa
Pages : 108-117
Doi:10.35208/ert.1306840
View : 135 | Download : 155
Publication Date : 2024-03-31
Article Type : Research
Abstract :Recent innovative research efforts on the usage of plastic wastes as a cheap carbon source for carbon nanotubes (CNTs) production have emerged as a low-cost and sustainable means of producing CNTs. However, plastic waste-derived CNTs are rarely used in some purity-sensitive and high-alignment needed applications due to the poor quality of CNTs resulting from the abundance of impurities such as non-crystalline amorphous carbon, metallic nanoparticles, and other impurities. Therefore, purification is a crucial issue to be addressed to fully harness all potential applications of CNTs derived from waste plastic materials. Here, the effect of employing different purification methods on the morphology and purity of waste plastic-derived CNTs was investigated. CNTs were synthesized using waste polypropylene plastic as carbon feedstock via a single-stage catalytic chemical vapour deposition (CVD) technique. As-produced CNTs were purified using liquid-phase oxidation (chemical oxidation in nitric acid), gas-phase oxidation in air, and a combination of both liquid- and gas-phase oxidation methods. The synthesized and purified CNTs were characterized for morphology, purity, surface functional groups, thermal stability, and crystallinity using Transmission electron microscopy (TEM), Raman spectroscopy, Fourier Transform Infrared spectroscopy (FTIR), Thermogravimetric analysis (TGA), and X-ray diffraction (XRD), respectively. Results obtained showed that a combination of both liquid and gas phase oxidation purification techniques resulted in purer, better quality, and less defective CNTs with an IG’/IG value of 0.89 and ID/IG value of 0.86, while chemically treated CNTs (CNT-PC) presented more structurally defective CNTs and shortened nanotubes compared to other investigated treatment methods with an ID/IG value of 0.96. CNTs purified by a multi-step protocol (CNT-PAC) showed the highest weight loss of 72.3% indicating the highest quality and the presence of filamentous carbon. This study confirms that the choice of purification techniques influences the morphology and quality of plastic-derived CNTs.Keywords : Plastic waste derived carbon nanotubes, purification methods, chemical oxidation, air oxidation, morphology, quality