- Current Research in Dental Sciences
- Vol: 30 Issue: 2
- DEZENFEKSİYONUN MAKSİLLOFASİYAL SİLİKON ELASTOMERİN FİZİKSEL ÖZELLİKLERİ ÜZERİNE ETKİLERİ...
DEZENFEKSİYONUN MAKSİLLOFASİYAL SİLİKON ELASTOMERİN FİZİKSEL ÖZELLİKLERİ ÜZERİNE ETKİLERİ
Authors : Meral Kurt, Necla Kiliçkaya, Merve Bankoğlu Güngör, Seçil Karakoca Nemli
Pages : 274-281
Doi:10.17567/ataunidfd.527021
View : 21 | Download : 3
Publication Date : 2020-04-15
Article Type : Research
Abstract :Amaç: Bu çalışmanın amacı farklı dezenfeksiyon işlemlerinin maksillofasiyal silikon elastomerin yüzey pürüzlülüğü ve renk stabilitesi üzerine etkisinin değerlendirilmesidir. Gereç ve Yöntem: Maksillofasiyal silikon (M511; T echnovent ) materyalinden 60 adet disk şeklinde (15 mm çapında 3 mm kalınlığında) örnek hazırlandı. Örnekler dezenfeksiyon işlemlerine göre; 1) kontrol (distile su), 2) efervesan tablet (Corega), 3) nötral sabun (Sebamed), 4) dermal dezenfektan (Biorad Derm), 5) klorheksidin glukonat (Andorex) ve 6) otoklav olmak üzere altı gruba ayrıldı (n=10). Dezenfeksiyon işlemi otoklav grubu hariç günde iki defa 15 gün boyunca uygulandı. otoklav grubunda ise dezenfeksiyon toplamda 3 defa yapıldı. Renk ölçümleri, dezenfeksiyon işlemi öncesi ve sonrasında spektrofotometre ile gerçekleştirildi. Renk parametreleri kaydedilerek ΔE00 değerleri hesaplandı. Yüzey pürüzlülüğü ( Ra ) ölçümleri ise dezenfeksiyon işlemi öncesi ve sonrasında profilometre cihazı ile gerçekleştirildi. Elde edilen veriler; tek yönlü ANOVA ve tekrarlayan ölçümler için ANOVA testleri kullanılarak istatistik olarak analiz edildi (α=0,05). Bulgular: Otoklav grubunda ΔE00 değerleri (3,79) ; diğer gruplardan anlamlı derecede daha yüksek bulunurken diğer gruplar arasında istatistik olarak anlamlı fark yoktur (0,92-1,37) ( P >0,05) . Dezenfeksiyon işlemi öncesi ve sonrasında yüzey pürüzlülüğü değerlendirildiğinde dezenfeksiyon sonrası kontrol, efervesan tablet, nötral sabun, ve dermal dezenfektan gruplarında yüzey pürüzlülüğü değerleri anlamlı derecede daha yüksek bulundu ( P <0,05) . Nötral sabun grubunun dezenfeksiyon sonrası yüzey pürüzlülüğü değeri klorheksidin glukonat ve otoklav gruplarından anlamlı derecede daha yüksek bulundu ( P <0,05). Sonuç: Otoklavda yapılan dezenfeksiyon işleminin maksillofasiyal silikon elastomerin renk değişimi üzerinde önemli etkisi bulunmaktadır. Dezenfeksiyon işlemleri genellikle maksillofasiyal silikon elastomerin yüzey pürüzlülüğünü arttırmaktadır. Anahtar kelimeler: dezenfeksiyon , m aksillofasiyal protez, renk, silikon elastomerler Effects of Disinfection on the Physical Properties of a Maxillofacial Silicone Elastomer Abstract Aim: The purpose of this study was to evaluate the effects of different disinfection procedures on the surface roughness and color stability of the maxillofacial silicone. Material and Methods: Sixty disc-shaped specimens (15 mm in diameter and 3 mm in thickness) were fabricated from a maxillofacial silicone rubber (M511; T echnovent ). The specimens were divided into six groups according to the disinfection procedures: 1) control (distilled water), 2) effervescent tablets (Corega), 3) neutral soap (Sebamed), 4) dermal disinfectant (Biorad Derm), 5) chlorhexidine gluconate (Andorex), and 6) autoclave (n=10). Disinfection was performed two times a day for 15 days except group autoclave. In the group autoclave disinfection was applied for three times in total. Color measurements were performed by using a spectrophotometer before and after disinfection process. Color parameters were recorded and ΔE00 values were calculated. Surface roughness ( Ra ) were measured before and after disinfection process , using a contact stylus p rofilometer . Data were statistically analyzed using one-way and repeated measures of ANOVA tests ( a= 0.05). Results: Group autoclave showed the significantly higher ΔE00 values (3.79) among the groups, while the ΔE00 values of the other groups (0.92-1.37) were not statistically significant (p>0.05). When surface roughness were evaluated, the Ra values were significantly higher in control, effervescent tablets, neutral soap, and dermal disinfectant groups after the disinfection methods (p<0.05). The Ra values of group neutral soap after the disinfection were found significantly higher than chlorhexidine and autoclave groups (p<0.05). Conclusion: Autoclave disinfection had the higher impact on the color change of maxillofacial silicone. Disinfection procedures generally increased surface roughness. Key Words: color; disinfection; maxillofacial prosthesis; silicone elastomersKeywords : dezenfeksiyon, maksillofasiyal protez, renk