- Current Research in Dental Sciences
- Vol: 26 Issue: 3
- FİBER İLE GÜÇLENDİRME KOMPOZİT REZİNLERİN EĞİLME DİRENCİNE ETKİ EDER Mİ?
FİBER İLE GÜÇLENDİRME KOMPOZİT REZİNLERİN EĞİLME DİRENCİNE ETKİ EDER Mİ?
Authors : Güliz Aktaş, Emine Göncü Başaran, M. Barış Güncü, Pekka K. Vallittu, Lippo V. J. Lassila
Pages : 473-477
Doi:10.17567/ataunidfd.290303
View : 18 | Download : 4
Publication Date : 2016-12-01
Article Type : Research
Abstract :Amaç: Kompozit rezinler uzun yıllardır hem restoratif dolgu maddesi olarak hem de adeziv restorasyonlarda diş eksikliklerinin giderilmesinde kullanılmaktadır. Artan okluzal yükler karşısında kompozit rezinlerin fiber ile güçlendirilmesi materyalin dayanıklılığını artırmak amacı ile kullanılan bir yöntemdir. Bu invitro çalışmanın amacı fiber ile güçlendirmenin kompozit rezinlerde eğilme direncine olan etkisinin araştırılmasıdır. Gereç ve Yöntem: Farklı fiber dağılımına ve rezin oranına sahip kompozit bloklar (GR 1, GR 2, GR 3,) ve bir deneysel kompozit (GR 4) laboratuvar ortamında hazırlandı. Fiber ile güçlendirilmiş bloklar ve piyasada yer alan hazır kompozit blok (GR 5) kesme cihazı ile ebadı 2x2x25 mm olacak şekilde 5 gruba (n:18) ayrıldı. Örneklere 24 saat 37 C de distile suda bekletildikten sonra Universal test cihazında 1mm/dk hızla eğilme testi uygulandı. Sonuçlar tek yönlü varyans analizi (ANOVA) ile değerlendirildi. Bulgular: Tüm gruplar arasında istatiksel olarak anlamlı farklılık gözlenmiştir (p<0.001). Ortalama eğilme direnci değerleri ve standart sapmaları GR 1, GR 2, GR 3, GR 4 ve GR 5’de sırasıyla 130±6, 125±5.1, 136±6.8, 115±4 ve 85±2.9 bulundu. Gr 3 en yüksek değeri gösterirken, Gr 5 en düşük değeri göstermiştir (p<0.001). Sonuç: Bu invitro çalışmada kompozit rezinlerin cam fiber ile güçlendirilmesi eğilme direncini artırmaktadır. Anahtar kelimeler: Kompozit rezin, fiber, eğilme direnc DOES FIBER REINFORCEMENT EFFECT ON FLEXURAL STRENGTH OF COMPOSITE RESINS? ABSTRACT Aim: Composite resins have been used for many years both as a restorative material and adhesive restorations on the loss of tooth structure. Fiber reinforcement is the most commonly used method for increasing the strength of the composite materials under increased occlusal forces. The aim of this in vitro study was to investigate the effect of fiber reinforcement of composite resins for their flexural strength. Material and Methods: Composite blocks (GR 1, GR 2, GR 3,) which have different fiber configurations/ resin ratio and experimental composite (GR 4) were prepared in laboratory condition. Fiber reinforced composite blocks and commercial available composite blocks (GR 5) were cut into small specimens (2x2x 25mm) into 5 subgroups (n:18). The specimens were stored in distilled water at 37 0 C for 24 hour, and then flexural strength tests were performed with using Universal Testing Machine. Data were analyzed using one-way ANOVA. Results: Significant differences were found among the flexural strength of the tested groups (p<0.001). The mean flexural strength values of the GR 1, GR 2, GR 3, GR 4 and GR 5 were 130±6, 125±5.1, 136±6.8, 115±4 and 85±2.9 respectively. GR 3 exhibited the highest flexural strength values in comparison to the other groups (p<0.001). While control group (Gr 5) exhibited the lowest. Conclusion: It is concluded that glass fiber reinforcement improves the flexural strength of composite resins. Key words: Composite resin, fiber, flexural strengthKeywords : Kompozit rezin, fiber