- Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi
- Vol: 28 Issue: 3
- AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ
AKRİLİK REZİN DİŞLERİN FARKLI KAİDE MATERYALLERİNE BAĞLANMA DAYANIMLARININ İNCELENMESİ
Authors : Merve Köseoğlu, Funda Bayindir, Özlem Özbayram, Alper Özdoğan
Pages : 377-384
Doi:10.17567/ataunidfd.473306
View : 20 | Download : 9
Publication Date : 2018-07-11
Article Type : Research
Abstract :Amaç: Çalışmada, tutucu oluklu ve oluksuz akrilik rezin dişlerin farklı kaide materyallerine bağlanma dayanımlarına tamir materyallerinin etkisinin incelenmesi amaçlanmıştır. Gereç ve Yöntem: Çalışma kapsamında 30 adet ısı ile polimerize olan PMMA (polimetilmetakrilat) ve 30 adet poliamid olmak üzere toplam 60 adet disk şek- linde kaide materyali kullanıldı. Tamir materyali olarak; ısı ile polimerize olan PMMA, otopolimerize PMMA ve ışık ile polimerize olan tamir materyalleri kullanıldı. Ayrıca tutucu oluklu ve oluksuz olmak üzere toplam 60 adet akrilik rezin diş kullanıldı. Örneklerin bağlanma dayanımları universal test cihazında 1 mm/dk hızla ölçüldü. Verilerin istatistiksel değerlendirilmesi iki yönlü varyans analizi (ANOVA) testi ile yapıldı. Bulgular: Poliamid kaide maddesi grubunda; ışıkla polimerize olan tamir materyali grubunda bağlanma dayanımı, ısıyla polimerize olan PMMA ve otopolimerize PMMA gruplarından istatistiksel olarak anlamlı dere- cede farklı bulunmuştur (p<0.001). Isıyla polimerize olan PMMA grubunda; ışıkla polimerize olan tamir materyalinin en yüksek, otopolimerize PMMA' nın ise en düşük bağlanma dayanımı değerlerine sahip olduğu görülmekle beraber gruplar arasında istatistiksel olarak anlamlı farklılık bulunamamıştır (p>0.05). Poliamid kai- de materyalinin ışıkla sertleşen tamir materyali alt gru- bu hariç bütün gruplarda dişlerin oluklu veya oluksuz olmasının bağlanma dayanımını istatistiksel olarak anlamlı derecede etkilemediği görülmüştür (p>0.05). Sonuç: Çalışma sonucunda, farklı tamir materyalleri akrilik dişlerin farklı kaide materyallerine bağlanma dayanımlarını etkilediği anlaşılmıştır. Anahtar Kelimeler: Poliamid, PMMA, ışıkla sertleşen tamir materyali EVALUATION THE BOND STRENGTH OF ACRYLIC RESIN DENTURE TEETH TO DIFFERENT BASE MATERIALS ABSTRACT Aim The objective of this study was to evaluate the effect of different repair materials on bond strength of denture teeth with/ without retention grooves to different base materials. Materials and Methods: 30 heat-cured PMMA and 30 polyamide; totally 60 disc- shaped base materials were used in this study. As repair materials; heat-cured PMMA, autopolymerising PMMA, light-cured denture resin repair materials were used. Also 60 acrylic resin denture teeth with/ without retention groove were used. The bonding strengths of the samples were measured at a speed of 1 mm / min on a universal test machine. The data obtained were statistically analyzed with two way-ANOVA. Results: In polyamide denture base group, shear bond strengths of light cured denture resin repair material was statistically higher than heat- cured PMMA and autopolymerising PMMA groups (p<0.001). Similarly in heat- cured PMMA denture base group, shear bond strength of light cured denture repair material was higher than autopolymerising PMMA and heat- cured PMMA subgroups but there was no statistically significant difference between subgroups (p>0.05). Retention groove of denture teeth doesn't affect subgroup's shear bond strengths significantly except the polyamide base material repaired with light- cured denture resin (p>0.05). Conclusion: It was denture repair materials tested in this study affect bond strength of denture teeth to different base materials. Keywords: Pol-yamide, PMMA, light-cured denture repair materialKeywords : Poliamid, PMMA