- International Journal of Computational and Experimental Science Engineering
- Cilt: 9 Sayı: 4
- Microstructure and tensile properties of AISI 410 stainless steel welded TIG method
Microstructure and tensile properties of AISI 410 stainless steel welded TIG method
Authors : Adnan Çalik, Nazım Uçar
Pages : 394-397
View : 33 | Download : 61
Publication Date : 2023-12-31
Article Type : Research
Abstract :In this study, the microstructure and tensile properties of AISI 410 stainless steel were studied. TIG welding was carried out on steels by using welding wire ER 410 (AWS A5.9) 2.8 mm in diameter. The obtained results showed that while tensile and yield strength increased, the elongation value decreased significantly. The yield strength and tensile strength were measured as 619 and 801 MPa after welding process, respectively. On the other hand, the microstructure of weld metal region had a dual phase such as martensite and ferrite.Keywords : AISI 410 stainless steel, tensile properties, microstructure, TIG, failure