- International Journal of Computational and Experimental Science Engineering
- Vol: 5 Issue: 3
- Experimental Investigation of Surface Roughness of Cutting Parameters in T6 Aluminum Alloy Milling P...
Experimental Investigation of Surface Roughness of Cutting Parameters in T6 Aluminum Alloy Milling Process
Authors : Neslihan Özsoy
Pages : 105-111
Doi:10.22399/ijcesen.590692
View : 7 | Download : 3
Publication Date : 2019-11-30
Article Type : Research
Abstract :In this study, optimum machining conditions were determined by investigating the surface roughness of the 7075-T6 aluminum alloy milling, depending on the spindle speed (rpm), feed per tooth (Fz-mm/tooth) and the cooling type parameters. Taguchi experiment design method was used to save time and cost. Experiments were based on the Taguchi L16 orthogonal array and signal/noise (S/N) ratios were used in the evaluation of the test results. Optimum surface roughness values were determined with Taguchi optimization. In addition, variance analysis and regression analysis were performed. Confirmation tests were conducted to verify the work. As a result of the confirmation tests, it was found that the surface roughness optimization in the milling of the 7075-T6 aluminium alloy was successfully applied.Keywords : Milling, surface roughness, Taguchi, ANOVA