- Uludağ Üniversitesi Mühendislik Fakültesi Dergisi
- Vol: 28 Issue: 2
- PLASTIC JOINING METHODS: ULTRASONIC AND VIBRATION WELDING
PLASTIC JOINING METHODS: ULTRASONIC AND VIBRATION WELDING
Authors : Onur Kiyili
Pages : 665-684
Doi:10.17482/uumfd.1278128
View : 145 | Download : 97
Publication Date : 2023-08-31
Article Type : Research Article
Abstract :Plastic welding is a common method for manufacturing parts that can’t be molded and has a complex geometry such as the part that has undercuts. The process is suitable for mass production, cheap and meets automotive requirements. The process helps the zero-emission target of the automotive industry, due to the biggest obstacle of the plastic use in this sector was the moldability of the complex geometries. Most of the engine parts such as thermostat, water pump etc. can’t be molded as one piece. These engine components are manufactured by helping the plastic welding and decrease the weight of the automobile, therefore, improving fuel efficiency. Plastic welding technology has become more important especially in electrical vehicles, because metal to plastic replacement has a significant role in decreasing the weight of the vehicle. Selecting the welding method according to the polymer properties and the geometry of parts are the most important factors for the application area. All of the welding methods are basically based on the remelting of the welding surfaces of the parts and the consolidation of them under the pressure. In this paper, the vibration welding and the ultrasonic welding methods have been inspected. The most effective parameters of both processes have been discussed and shown.Keywords : vibrasyon kaynağı, ultrasonik kaynağı, termoplastik, kaynak mukavemeti