- Politeknik Dergisi
- Vol: 26 Issue: 2
- Investigation Mechanical and Microstructural Behavior of Operated and Unoperated Turbine Rotor Discs
Investigation Mechanical and Microstructural Behavior of Operated and Unoperated Turbine Rotor Discs
Authors : Elif UZUN KART, Cemre ÖZGÜL
Pages : 743-749
Doi:10.2339/politeknik.1062820
View : 143 | Download : 586
Publication Date : 2023-07-05
Article Type : Research Article
Abstract :In gas turbine engines, turbine sections are exposed to high temperature and loads during operation and therefore turbine inlet boundary is considered the most challenging for turbomachines. Ni-based super-alloys are used for turbine materials in gas turbine engines because of their superior mechanical characteristics at high temperatures. In this research, two Mar M-247 polycrystalline cast Ni-based turbine rotors, which were operated and non-operated in turbojet engine tests, had the same design and applied the same two-step aging heat treatment, were examined microstructurally and mechanically. As a result of the mechanical analysis, it was observed that the tensile strength (Rm (P): 537Mpa; Rm (G): 590 Mpa) ductility, and hardness (429 HV (P), 440 HV (G)) of the operated turbine rotor increased. In the microstructure analysis, blocky and Chinese script-like carbides and gamma prime eutectic islands were found in both turbine structures. EDS analysis showed that the carbides in the matrix are rich in Hf, Ta, and Ti, and the grain boundary carbides are rich in Cr and W.Keywords : Mar M-247, Ni-based superalloys, gas turbine turbojet engines