Sintering and Characterization of SiC Reinforced Ni Powders in Microwave Furnace

Authors : Ahmet Yonetken, Ayhan Erol

Pages : 83-89

Doi:10.29137/umagd.474003

View : 20 | Download : 17

Publication Date : 2020-01-31

Article Type : Research

Abstract :SiC reinforced nickel matrix composites, microwave at different temperatures It is produced by sintering in oven. Nickel deposition on SiC powders was achieved by using electroless nickel plating technique.  It is sintered at temperatures between 500°C, 600 °C, 700°C, 800°C and 900°C under Ar atmosphere. XRD, SEM (Scanning Electron Microscope), pressure test and hardness measurements were used to characterize the properties of sintered samples in microwave furnace. The experimental results, maximum compressive strength (σmax) and hardness (HV) were carried out at 800 °C.  Microwave sintering of Ni-coated SiC powders without electric current can be a promising technique for producing ceramic-reinforced nickel composites.
Keywords : Microwave sintering, Powder metallurgy, Composites, Nickel plating